There are various kinds of heat pumps available in the market. The ground source heat pump is probably the most common type. It works by utilizing the heat beneath the ground surface to warm up residential areas in the cold times. The other types of heat pumps, though less common, are environment friendly. They include; the air source type and the water source type. The fluid which is circulated directly below in the ground tubes or in other heat sources will gather the low-temperature heat and will make its transport medium move across the unit so that it can fully takes over the heating of your water and also heating up the atmosphere of your home interior most importantly.
Heat pumps are much more cost-effective than other conventional heating devices, and are also becoming more commonly used to heat swimming pools, and hot water for household use.
What are the main components of a heat pump?
Heat pumps comprises of a compressor, condenser, piping, evaporator and the pump itself. When all these components are combined, they form a cycle that allows water as well as a mixture of fluid refrigerant to flow through. The fluid mixture goes beneath the ground so as to get heated by the warmth from the earth before it is flowed up again.
How do heat pumps work?
As the sun’s rays strike the ground, they heat up the ground surface. Heat pumps utilize this heat by harnessing it from the ground. These pumps play a vital role in regulating the temperature of your home. They can also provide your home with hot water. They can either warm up your home by transferring the heat from the ground into your home or cool it by transferring the heat back to the ground. Other than the ground, heat pumps can also harness heat from the air. For heat pumps to generate heat at lower temperatures, they must be given longer periods of time. Take for instance during winter: they must be turned on constantly for them to provide heat. This way, you are assured of consistent heating instead of blasting short lived high temperatures and then slowly growing colder again like in some traditional heating systems.
How a heat pump installation works
A heat pump has both internal and external heat exchangers. This kind of heat pump has to contain a fan while other types have both the fan and a converter. This gadget is actually a pricey air conditioning system, which is just perfect for cooling and heating. It is designed in a way that its functionality tends to shift heat from one point to another.
The temperature of the fluid being circulated beneath in the conduits in the underground will build up with the low-temperature heat around, and then it will slide through the pump unit which then gets the warmth from the water thus letting it heat up the actual environment.
Why are heat pumps beneficial?
Heat pumps have a lot of advantages more than you can imagine. Results have been published from the UK’s largest field trial showing that about 40% of the people living there have heat pumps. First, it will allow you to make savings on your heating bills if you are considering replacing a traditional electric heating system. Secondly, it assists in reducing carbon dioxide emissions but this depends on the heating system you were previously using. Installing heat pumps is most likely to make your home environmental-friendly since it solely relies on renewable sources of energy. It is not regrettable to take advantage of a freely available source of energy.
Heat pump installation should be done in a well drained are and not so windy at the same time. It is also advisable to avoid areas prone to snow during the winter to avoid damaging your machine.