drdrip pipe reliningPipe relining has become a mainstream solution for repairing pipes in municipal areas as well as major cities. It’s so much better than conventional pipe repair procedures since it requires minimal excavation and is pretty much a long term solution. For those who don’t know what this process is, pipe relining is a rehabilitation method that allows the insertion of new and improved modified pipes into the current pipe system. The introduction of the additional pipe can improve the water flow performance and add durability. In this article, we tackle the brief history and development of the pipe relining method.

Early Years

The technology and engineering started its foundation back in 1971 at London, England. It was Eric Wood who applied the first ever cured-in-place pipe(CIPP) technology. The method was later commercialised by Insituform Technologies.

In its early years, pipe relining is only capable of rehabilitating pipes that have large sizes. It wasn’t able to perform relining on small pipes since it required a more complex process and the equipment and technology during those times were limited. However, continuous improvement and innovation made the method more viable for both residential and commercial applications. Pipe relining finally became available in the 1990’s as an effective solution for pipe repairs.

Pipe Relining Today

Today, pipe relining has become widely accepted as a primary pipe rehabilitation process. With the demand for this type of service and a healthy dose of competition, companies try to outdo each other by offering warranties and other high quality service for their various clients. When the CIPP patent was finally diminished, dozens of companies adapted the method and tried to enhance the process with their own ingenuity.

Pipe relining has evolved from a small-scale fix to a more advanced solution. It has branched into other applications such as mechanical piping, cooling systems, swimming pools, etc. As mentioned earlier, the first pipe relining methods were only able to embed pipes with large diameters, but now, it can insert pipes that are ½ inch small in diameter! It’s truly amazing how this process has evolved throughout the years.

Why You Should Take Advantage of this Modern Solution

If you ever need to have your pipes fixed, then you really should consider CIPP. Because CIPP is indeed a trenchless technology, it rarely needs any excavation. The need for excavation will depend on the scale of the project. For example: a pipe lining that is leaking or have a few structure damage, an excavation is not needed.

Leakages and tree root invasions are significantly decreased or completely eliminated with the use of pipe relining. The materials used for the method are top notch, such as special cement and layered epoxy. For quality control and safety purposes, the materials are subjected by third party laboratories. Lastly, when looking for a contractor, always go for those who have a lot of experience and has a great reputation.