plumberelizabethbay clogged-toilet-using-plunger

When you notice plumbing problem at home, note that it should always be prioritised and mended immediately for it might affect the entire system. For instance, clogged toilet are inevitable. However, if you have managed to discover the problem at its earliest stage, then it’s not hard for you to mend it. If you are experiencing such right now, here is a step by step guide for you to follow:

Step 1. Turn the water supply off

When after flushing, your toilet begins to clog, the first course of action you have to make is to locate for the water valve that is typically placed on the wall. The aforementioned should be shut down immediately by turning the valve in a clockwise direction. After doing this, don’t expect that the problem is already fixed, mind that it’s just the initial step in fixing the issue. Also, this serves as a safety precaution in case emergency begins to occur. Reminder, when dealing with clogged toilets, don’t repeatedly flush the toilet to avoid toilet overflow.

Step 2. Get a plunger

Utilising the plunger is one the most traditional ways of dealing with this kind of problem. In the market, there are several types of plunger used in various situations and purposes. For instance, a traditional cup plunger is typically utilised on curvy surfaces and sinks. However, for clogged toilet situations, a flange plunger should be used. The flange portion of the makes a seal in the gulley of the bowl. This ables to plunge the clogged down to the toilet.

As mentioned, several types of plunger exist, whatever clogged issue it be, make sure that the plunger has the size that could cover the opening of the toilet. Aside from that, make sure that there is enough water in the bowl in order to force the water and eliminate the clog out.

Step 3. Install the suction cup into the opening of the toilet bowl

After putting the suction cup, you need an extra force in pumping the plunger in the opening. While doing it, you will feel that the pressure is building up while sucking the clog. After that, try to remove the plunger after 5-10 pumps and if the clog is eliminated. If it’s still present, try to repeat what pumping process.

Then, turn the water on and see if the water is flushing down right after plunging. When it still persists, observe if overflow might occur and immediately shut off the water supply again.

Step 4. Use a closet auger

If the clog in your toilet is located down the pipe, then this is an entirely different situation. When you think this is happening, unfortunately, the plunger is no longer necessary. The right tool for this predicament is the closet auger. Typically, this tool is known due to its snake-like appearance. The closet auger has a lengthy wire which can be inserted down the toilet bowl in order to get rid of the clog. If you don’t have an auger and you definitely don’t to spend for some, you can create a tool which has the same function with it. One example could be a bent wire hanger.